Tensile testing
View article: Material characterization for RC beam-column joints with and without steel fibers
Material characterization for RC beam-column joints with and without steel fibers Open
This research hypothesized that incorporating 0.7% hooked-end steel fibers significantly enhances concrete's mechanical behavior, particularly improving ductility and flexural performance for seismic-resistant structures. The study aimed t…
View article: Physicochemical and Mechanical Characterization of HDPE and LDPE Films Used in the Postharvest Packaging of Banana (Musa paradisiaca)
Physicochemical and Mechanical Characterization of HDPE and LDPE Films Used in the Postharvest Packaging of Banana (Musa paradisiaca) Open
The postharvest preservation of banana (Musa paradisiaca) is essential to maintain fruit quality and minimize losses during storage and export. Packaging films play a critical role in protecting fruit from mechanical damage and environment…
View article: Investigating Tensile & Impact Properties of Recycled Polypropylene, Polyvinyl Chloride, Polyamide & Polyethylene
Investigating Tensile & Impact Properties of Recycled Polypropylene, Polyvinyl Chloride, Polyamide & Polyethylene Open
Although Pakistan has an abundance of natural resources, it also faces a significant challenge with plastic waste, producing 3.3 million tons annually. This environmental issue demands immediate action, especially due to the increased dema…
View article: ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES
ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES Open
Title paper: ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES Journal: Advanced Composites and Hybrid MaterialsGeneral information ⋅ authors: Anthony Hoog…
View article: NFDI-MatWerk/IUC02 Data schema for elevated temperature tensile data of Ni-based superalloys
NFDI-MatWerk/IUC02 Data schema for elevated temperature tensile data of Ni-based superalloys Open
Strength characteristics, such as proof strength and tensile strength, of metallic materials are usually measured at room temperature. However, for high-temperature materials, the values at operational temperatures are equally important fo…
View article: NFDI-MatWerk/IUC02 Data schema for elevated temperature tensile data of Ni-based superalloys
NFDI-MatWerk/IUC02 Data schema for elevated temperature tensile data of Ni-based superalloys Open
Strength characteristics, such as proof strength and tensile strength, of metallic materials are usually measured at room temperature. However, for high-temperature materials, the values at operational temperatures are equally important fo…
View article: The Residual mechanical performance of UHPC with the addition of carbon steel and polypropylene fibers after exposure to 600 °C
The Residual mechanical performance of UHPC with the addition of carbon steel and polypropylene fibers after exposure to 600 °C Open
Ultra-high-performance concrete (UHPC) is a material that has revolutionized the construction industry due to its versatility of use and the reduction of the cross-sections of structural elements. However, when exposed to high temperatures…
View article: Hybrid bio-composites reinforced with kenaf and snake grass fibers and neem gum: Synergistic effects and role of fiber aspect ratio
Hybrid bio-composites reinforced with kenaf and snake grass fibers and neem gum: Synergistic effects and role of fiber aspect ratio Open
The influence of neem gum powder (NGP) was evaluated relative to the mechanical, physical, and morphological properties of hybrid epoxy composites reinforced with varying ratios of kenaf and snake grass fibers. Six composite samples (KS1 t…
View article: ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES
ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES Open
Title paper: ENHANCING REPROCESSABILITY OF DYNAMIC POLYMER COMPOSITES WITH THERMALLY SENSITIVE PARTICLES AND CONTROLLED PARTICLE-MATRIX INTERFACES Journal: Advanced Composites and Hybrid MaterialsGeneral information ⋅ authors: Anthony Hoog…
View article: Selection of Optimal Filler Metal for Dissimilar Welding of SA335 Gr. P11 and Incoloy 800 in Primary Reformer Tube Catalyst Repairs
Selection of Optimal Filler Metal for Dissimilar Welding of SA335 Gr. P11 and Incoloy 800 in Primary Reformer Tube Catalyst Repairs Open
This investigation explores the effect of various filler metals on the mechanical performance of dissimilar weld joints between SA335 Gr. P11 and Incoloy 800, with particular relevance to repair operations in primary reformer tube catalyst…
View article: Experimental and numerical determination of mechanical properties of porous thermoplastic
Experimental and numerical determination of mechanical properties of porous thermoplastic Open
The main aim of this paper is to experimentally and numerically determine the mechanical properties of thermoplastics that exhibit porosity due to 3D-printing. The mechanical properties of thermoplastics (polyacrylonitrile-co-butadiene-co-…
View article: Systematic all-round examination of the viscoelastoplastic properties of nanocomposites with increased wear resistance based on polytetrafluoroethylene. Part 2
Systematic all-round examination of the viscoelastoplastic properties of nanocomposites with increased wear resistance based on polytetrafluoroethylene. Part 2 Open
A description of the technology for manufacturing composites with increased wear resistance based on polytetrafluoroethylene (PTFE) is given. The composites were obtained by introducing mechanically activated layered silicates (kaolinite, …
View article: Evaluation of Mechanical Anisotropy of New Polycarbonate Through Process Parameter Optimization in Material Extrusion
Evaluation of Mechanical Anisotropy of New Polycarbonate Through Process Parameter Optimization in Material Extrusion Open
The parts fabricated using the material extrusion (MEX) process exhibit anisotropic mechanical properties depending on the build orientation, primarily due to incomplete interlayer bonding. In this study, a new polycarbonate (PC) is adopte…
View article: The effect tig welding parameters on mechanical properties of stainless 321 by Taguchi method
The effect tig welding parameters on mechanical properties of stainless 321 by Taguchi method Open
Welding is an area in which technological developments out match the developments in its science base which is primarily driven by the phenomenal industrial demand for welded structure. Taguchi s Design of experiment approach is used to st…
View article: The Influence of Strain Rate Variations on Bonded-Particle Models in PFC
The Influence of Strain Rate Variations on Bonded-Particle Models in PFC Open
Understanding the strain rate behavior of rock materials is key to geomechanical engineering. However, in numerical tools such as the Particle Flow Code (PFC), the chosen bonded-particle contact model also fundamentally dictates the mechan…
View article: Multi-scale mechanical characterization of the lining canvas of The Night Watch by Rembrandt
Multi-scale mechanical characterization of the lining canvas of The Night Watch by Rembrandt Open
This contribution presents a multi-scale experimental analysis of the mechanical properties of the lining canvas of The Night Watch (1642), a large-format canvas painting by Rembrandt van Rijn. The original canvas has deteriorated signific…
View article: Assessment of fatigue and thermal performance in aluminum alloys using Taguchi and ANOVA
Assessment of fatigue and thermal performance in aluminum alloys using Taguchi and ANOVA Open
This study investigates the mechanical and fatigue performance of AA7075‑T4 aluminum alloy at 25, 100, and 150°C. Tensile and fatigue tests were conducted to evaluate ultimate tensile strength, yield strength, Young’s modulus, and ductilit…
View article: Tensile testing samples with different plastic materials.
Tensile testing samples with different plastic materials. Open
Tensile testing samples with different plastic materials.
View article: CoO-NPs and GPC/ 2.5% CoO nanocomposite a) Young’s Modulus b) Tensile strength c) % Elongation at break.
CoO-NPs and GPC/ 2.5% CoO nanocomposite a) Young’s Modulus b) Tensile strength c) % Elongation at break. Open
CoO-NPs and GPC/ 2.5% CoO nanocomposite a) Young’s Modulus b) Tensile strength c) % Elongation at break.
View article: Mechanical properties of a new Fe-Ni-based Invar alloy doped with Ti, V and C
Mechanical properties of a new Fe-Ni-based Invar alloy doped with Ti, V and C Open
The Fe-36 wt.% Ni binary Invar alloy has low mechanical strength, with an ultimate tensile strength (σUTS) of less than 500 MPa. This greatly limits its practical applications. An increase in mechanical properties was achieved by the devel…
View article: Mechanical properties of dried fruit packaging materials
Mechanical properties of dried fruit packaging materials Open
One of the important mechanical properties of packaging materials is its tensile strength. The good tensile strength is essential for materials and their mobility, packaging and for correctness when forming packing units. In this paper, st…
View article: Microstructure and micromechanism of fracture of Ni-Al-Cr alloy produced by dual-wire electron-beam additive manufacturing
Microstructure and micromechanism of fracture of Ni-Al-Cr alloy produced by dual-wire electron-beam additive manufacturing Open
In this paper, we provide electron microscopic and in-situ X-ray study of microstructure in an Ni-Al-Cr intermetallic alloy that has been obtained by a dual-wire electron beam additive manufacturing using commercial NiCr and Al wires. As-b…
View article: Effect of TiC particles on the microstructure and properties of as-cast 7075‑based metal matrix composite
Effect of TiC particles on the microstructure and properties of as-cast 7075‑based metal matrix composite Open
This study examines the effects of titanium carbide (TiC) particles on mechanical properties, microstructure, and the coefficient of linear thermal expansion of aluminum alloy 7075 in the as-cast state. Composite materials with a 7075 allo…
View article: TGA of CoO-NPs and GPC/ 2.5% CoO nanocomposite.
TGA of CoO-NPs and GPC/ 2.5% CoO nanocomposite. Open
This research work presents a fabrication and study to explore different features of Gelatin/ Polyethylene glycol/ Chitosan ternary composite films doped with cobalt oxide nanoparticles. Such films were prepared by solution casting techni…
View article: A Compact Cryogenic Environment for In Situ Neutron Diffraction Under Mechanical Loading
A Compact Cryogenic Environment for In Situ Neutron Diffraction Under Mechanical Loading Open
Understanding the deformation mechanisms of materials at cryogenic temperatures is crucial for cryogenic engineering applications. In situ neutron diffraction is a powerful technique for probing such mechanisms under cryogenic conditions. …
View article: Tensile sample experiment mold.
Tensile sample experiment mold. Open
Mold temperature control critically influences injection molding, impacting product quality and production efficiency. High mold temperatures enhance surface quality but prolong cooling, increasing cycle time, whereas low temperatures cau…
View article: Tensile testing specimen dimensions.
Tensile testing specimen dimensions. Open
Mold temperature control critically influences injection molding, impacting product quality and production efficiency. High mold temperatures enhance surface quality but prolong cooling, increasing cycle time, whereas low temperatures cau…
View article: Effect of the heating time on the tensile strengths of weld-line with different plastic materials under different heating times.
Effect of the heating time on the tensile strengths of weld-line with different plastic materials under different heating times. Open
Effect of the heating time on the tensile strengths of weld-line with different plastic materials under different heating times.
View article: Direct Ink Writing of Carbon-Based Electrofluids for Soft Electrical Component Manufacturing
Direct Ink Writing of Carbon-Based Electrofluids for Soft Electrical Component Manufacturing Open
The presented data was used in the related work to discuss the printability of Electrofluids. CB: Carbon Black GF: Graphene GLY: glycerol PP25S: parallel plate 25mm rough It contains: flow curves (FC) amplitude sweeps (SAOS - LAOS) ; (S: p…
View article: The experimentally measured and curve fitted stress-strain relationship from biaxial tensile testing of a human vocal fold cover layer along the anterior-posterior (AP) and transverse directions.
The experimentally measured and curve fitted stress-strain relationship from biaxial tensile testing of a human vocal fold cover layer along the anterior-posterior (AP) and transverse directions. Open
The experimentally measured and curve fitted stress-strain relationship from biaxial tensile testing of a human vocal fold cover layer along the anterior-posterior (AP) and transverse directions.