Aluminium alloy ≈ Aluminium alloy
View article
Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach Open
Aluminium alloy is the popular material in the world to produce lot of light weight parts with high strength, in additionally reinforcement is consider to these alloy is improve its strength. In this investigation consider the AA7050 alumi…
View article
A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium Open
Although wire arc additive manufacturing (WAAM) has proven its capability of fulfilling demands of production of medium-to-large-scale components for automotive and allied sectors made up of aluminium, at present, WAAM cannot be applied as…
View article
Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM) Open
Selective laser melting (SLM) is an additive manufacturing process, forming the desired geometry by selective layer fusion of powder material. Unlike conventional manufacturing processes, highly complex parts can be manufactured with high …
View article
A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting Open
In recent years, many alloys as well as composites of aluminium were developed for enhanced material performance. AA 6061 is an aluminium alloy that has extensive applications due to its superior material characteristics. It is a popular c…
View article
Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization Open
Aluminium alloys are widely used in the fields of electric module packaging, electronic technology, automotive body structure, wind and solar energy management, due to the advantages of high specific strength, high processability, predomin…
View article
Mechanical Properties of SLM-Printed Aluminium Alloys: A Review Open
Selective laser melting (SLM) is a powder bed fusion type metal additive manufacturing process which is being applied to manufacture highly customised and value-added parts in biomedical, defence, aerospace, and automotive industries. Alum…
View article
Surface properties enhancements by optimizing synthesizing parameters of AA8026 + Zr2O3/TiO2 hybrid composite Open
Aluminium alloy is one of the widely used lightweight materials and is utilized in the production of a wide variety of components. The AA8026 properties enhancements through optimizing the synthesizing parameters through the Taguchi route …
View article
Localized corrosion in AA2024-T351 aluminium alloy: Transition from intergranular corrosion to crystallographic pitting Open
The relationship between intergranular corrosion and crystallographic pitting in AA2024-T351 aluminium alloy during immersion in 3.5 wt. % NaCl solution is investigated. It is found that intergranular corrosion occurs first and crystallogr…
View article
Experimental and numerical investigation of residual stresses in laser shock peened AA2198 Open
Laser shock peening (LSP) is a surface treatment which improves the fatigue performance of metallic structures by introducing compressive residual stresses. The aim of this paper is the investigation of LSP of the aluminium alloy AA2198. T…
View article
Influence of ambient conditions on the evolution of wettability properties of an IR-, ns-laser textured aluminium alloy Open
The evolution over time of wettability properties of super hydrophobic Al2024 developed using an IR-, ns-laser was studied under different storage conditions.
View article
[Retracted] Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM Open
Aluminium alloy is widely used in engineering application, and it can be classified based on the constituent elements or alloying elements. Aluminium alloy is preferred for the nature of its tensile strength, ductility, and corrosion resis…
View article
Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy Open
Selective Laser Melting (SLM®), an additive manufacturing (AM) technology, allows manufacturing of geometrically complex metallic parts directly. In the SLM technology, a high energy laser beam is applied to melt a thin layer of the metall…
View article
Mechanical and metallurgical properties of friction stir welded dissimilar joints of AZ91 magnesium alloy and AA 6082-T6 aluminium alloy Open
In the present research work, AZ91 magnesium alloy and AA6082-T6 aluminium alloy were joined by friction stir welding process. The comparison of microstructure and mechanical properties between different joints by varying the different mat…
View article
Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition Open
Aluminum is among the most preferred materials based on the desired properties. This investigation focused on to evaluate the wear rate of the AA6066 aluminium alloy composite by using pin-on-disc apparatus. The composites were created wit…
View article
A review on mechanical joining of aluminium and high strength steel sheets by plastic deformation Open
Mechanical joining processes by plastic deformation such as self-piercing riveting, mechanical clinching and hemming for aluminium alloy and high strength steel sheets are reviewed. These mechanical joining processes without metallurgical …
View article
Correlations between Microstructure Characteristics and Mechanical Properties in 5183 Aluminium Alloy Fabricated by Wire-Arc Additive Manufacturing with Different Arc Modes Open
The effect of arc modes on the microstructure and tensile properties of 5183 aluminium alloy fabricated by cold metal transfer (CMT) processes has been thoroughly investigated. Heat inputs of CMT processes with three arc modes, i.e., CMT, …
View article
[Retracted] Mechanical Strength and Fatigue Fracture Analysis on Al‐Zn‐Mg Alloy with the Influence of Creep Aging Process Open
The Al‐Zn‐Mg alloy comes under the aluminium alloy; it possesses good capability of age hardening and superior strength in contrast to other alloys. The numbers of creep aging experiments are conducted with the support of different tempera…
View article
Progress and prospects in Mg-alloy super-sized high pressure die casting for automotive structural components Open
Since the introduction of Tesla's Giga-Casting process, the automotive industry has widely accepted the concept of super-sized structural components due to their significant potential for enhancing the light-weighting of both electric and …
View article
Study of hardness and tensile strength of Aluminium-7075 percentage varying reinforced with graphite and bagasse-ash composites Open
Waste sugarcane bagasse-ash and graphite utilizing as reinforcement in fabricating of an aluminium alloy (Al-7075) based matrix hybrid composites. The aluminium matrix hybrid composites have been fabricated by stir-casting method at 750 °C…
View article
Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloy Open
Friction stir welding (FSW) is a promising welding process that can join age hardenable aluminium alloys with high joint efficiency. However, the thermal cycles experienced by the material to be joined during FSW resulted in the deteriorat…
View article
The Influence of Tool Shape and Process Parameters on the Mechanical Properties of AW-3004 Aluminium Alloy Friction Stir Welded Joints Open
The purpose of the following study was to compare the effect of the shape of a tool on the joint and to obtain the values of Friction Stir Welding (FSW) parameters that provide the best possible joint quality. The material used was an alum…
View article
Mechanical Properties of Fibre-Metal Laminates Made of Natural/Synthetic Fibre Composites Open
Mechanical properties of fibre-metal laminates made of natural/synthetic fibre composites ABSTRCT Mechanical properties are among the properties to be considered in designing and fabricating any composite to be used as a firewall blanket i…
View article
In-situ laser shock peening for improved surface quality and mechanical properties of laser-directed energy-deposited AlSi10Mg alloy Open
In the recent decades, the laser-directed energy deposition (L-DED) of aluminium alloy has encountered significant challenges owing to the defects and tensile residual stress. In this study, the in-situ laser shock peening method is employ…
View article
Improved strength and ductility of friction stir tailor-welded blanks of base metal AA2024 reinforced with interlayer strip of AA7075 Open
Most of welded parts requires secondary forming process to meet the design requirements which makes the ductility of the joint an important parameter to be improved. To this end, we imped compensation layer of AA7075 aluminum alloy between…
View article
Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process Open
4043 aluminium deposits were elaborated using a 3D print device equipped with a Cold Metal Transfer welding source. Two sets of process parameters leading to different average powers were compared in order to establish the relations betwee…
View article
Papaya peel extract as potential corrosion inhibitor for Aluminium alloy in 1 M HCl: Electrochemical and quantum chemical study Open
This paper deals with the corrosion inhibition effect of Papaya peel extract (PPE) on Aluminium alloy (AA) in 1 M HCl. The corrosion tests were performed by using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarizatio…
View article
On the coupling of damage and single crystal plasticity for ductile polycrystalline materials Open
A crystal plasticity model accounting for damage evolution and ductile failure in a single crystal due to the presence of voids or micro-cracks is presented. An accurate, robust and computationally efficient single crystal implementation i…
View article
Experimental and Mathematical Modeling for Prediction of Tool Wear on the Machining of Aluminium 6061 Alloy by High Speed Steel Tools Open
In recent machining operation, tool life is one of the most demanding tasks in production process, especially in the automotive industry. The aim of this paper is to study tool wear on HSS in end milling of aluminium 6061 alloy. The experi…
View article
Enhancing the mechanical, wear and corrosion behaviour of stir casted aluminium 6061 hybrid composites through the incorporation of boron nitride and aluminium oxide particles Open
This research paper portrays the enrichment of mechanical, wear and corrosion properties of the Aluminium 6061 matrix composite by incorporating hybrid reinforcements. Aluminium 6061 alloy is stir casted with different proportions of boron…
View article
High-velocity impact deformation and perforation of fibre metal laminates Open
The quasi-static flexural and impact performance, up to projectile impact velocities of about 270 m s−1, of fibre metal laminates (FMLs), which consist of relatively thin, alternately stacked, layers of an aluminium alloy and a thermoset g…